|
| Print Technology |
Drop-on-demand Micro Piezo Inkjet Technology
8 heads – variable drop – 2 nozzle rows with 180 nozzles each / head
Drop mass (ng) : 5.4, 11.5, 14, 25, 28 and 42 |
| Print Resolutions |
360 x 360 dpi, 720 x 360 dpi, 540 x 720 dpi & 720 x 720 dpi |
| Maximum Media Width |
2604 mm (102.52”) |
| Print Width |
2594 mm (102.13”) |
| Media Thickness Compensation |
Automatic media thickness compensation
Variable – RIP controlled – Head Height |
| Media |
Thickness: Range: 0.08 mm – 1.1 mm
Diameter / Core: Maximum: 300 mm / 2” or 3”
Weight: Maximum load: 00 kg*
* Some media over 1.6 m wide may be wound onto a core that bends through. In that case Uniform strongly recommends to install the standard included media core brace. Maximum roll media weight in this case is 80 kg. |
| Intelligent Interweaving (i²) |
Available for 360 x 360 dpi, 540 x 720 dpi & 720 x 720 dpi output resolutions
Weave settings : Sign/Quality, Picture/Speed, Stitch, Classic & Off |
| Colour / Ink Setup |
CMYK – 4 x 4 (CMYK) nozzle rows – one colour per head |
| Ink Capacity / Type |
Cassettes : 220 ml & 440 ml / smart chip ink type & order sensing
Bulk bottles : 1 & 5 litre |
| Heaters |
Incorporated 4-stage heater system : Pre-heater (max. 50 °C),
Fixer (max. 40 °C), Post-Fixer (max. 40 °C) and Dryer (max. 50 °C) |
| LCD Display |
Backlight LED – 4 lines x 20 characters |
| Interface |
Ethernet Network Card / Centronics, IEEE 1284 compatible |
| Graphics Command Language |
RTL-PASS |
| Print Engine Working Environment using Mild Solvent Inks |
Temperature: 18 – 27 °C
Relative Humidity: 40 – 65 % RH (no condensation) |
| Regular Maintenance |
A Brigadier mild solvent printer requires a dedicated operator trained on performing daily maintenance routines. All parts requiring regular inspection and/or maintenance are easily accessible via the large protective cover. |
| Air Purification Equipment |
Use of mild solvent inks intrinsically requires the use of an air purification system. Brigadier Grand is equipped with exhaust holes for easy connection of forced ventilation equipment. For connection to an existing air purification system, an optional hose set with exhaust connectors is available. To ensure a clean and safe working environment, contact the local authorities to know the local acceptance levels. |
External Dimensions
in mm (WxDxH) |
4500 x 800 x 1300 mm |
| Weight |
520 kg |
| Power Consumption |
3000 VA
100 VA in stand-by mode |
| Power Supply |
AC 100 – 120 V / AC 220 – 240 V auto-switching |
| |
